What types of four stroke lubrication systems are there? There are four main types that are used on four stroke motorcycle engines: The splash or spray system The total loss system The dry sump system The wet sump system 1. The splash or
From day one of this cafe racer project I have always had it in my mind that all wiring should be well and truly hidden. To many really good creative bikes are made with little or no thought for the wiring. I like my wiring tidy and when ev
From time to time we get the same inquiries about various aspects of motorcycle building. Brakes is one of those subjects. People come into the workshop, phone or email saying ‘my brakes are spongy and how can I fix them’ or
Finally I have reached the stage of reconstruction. The frame has returned from the painters (‘Full Range Finishes’ – Letchworth) and the swinging arm freshly chrome plated (‘Doug Heath’ – Baldock). First
NAMES: Aqua blasting, also known as vapour blasting and wet blasting. WHAT IS AN AQUA BLASTER?: Essentially it is a machine that operates using a medium compressed air supply and a high pressure pump. The sump of the cabinet type aqua blast
A customer approached us with a damaged gooseneck assembly from his ‘Vortex Laser’ assymetric racing dinghy. The damage to the fitting was caused when the boom swings over too far and attempts to pull the gooseneck from the mast
The engine I have now completed and ready for installation. The crank cases were firstly striped of components and modified. The starter motor was not going to be needed so I ground most of the housing for it away. This also meant I had to
With any carburettor restoration the first thing to do is assess the carburettor and see if it is actually worth restoring. The cost of restoration could be more than buying a new one. However if it is a hard to find one or expensive to rep
I have inherited from my father, Terry Ives, a 1954 Triumph Tiger 100, the first of the swinging arm models. The crankshaft and rods had gone missing some years ago, as they do, so I endeavoured to source a replacement. The original one wou
Battery in the rear tail hump The electrics are much reduced from the standard bike. The generator has been replaced by a single phase lighter item. I got this from Cycle Exchange in the US who sell a lot parts for 750 fours, check out thei
Construction of the chassis is near complete. The photo above shows the bike nearing the end of the dry build phase and almost ready for strip down polish and paint. The plan is that all the alloy parts be polished and the frame painted a c
A customer recently bought his Honda CB750 four into our bike shop for restoration and complaining of gear shifting problems. After inspection I found there was a gear selection problem. My customer compounded this by saying he had trouble
One of the first jobs I did was to improve on the front brake, which might have been fine for 1969, but not now. The standard fork leg was cleaned, polished and machined to take the special brackets made here by Terry Ives. It was originall
Having rewired many motorcyles over the years I thought I would list the two most common problems I encounted whilst rewiring a Big Bear chopper recently. Obviously the most common of electrical problems is connections and this bike had mor
One of the first thoughts on this bike was to build a unique cafe racer styled machine. I really liked the look of the CR750’s, so I purchased the petrol and oil tank. I didn’t want the engine to be covered and I wanted as much