1. Work on the Honda CB750 cafe racer project continues
From day one of this cafe racer project I have always had it in my mind that all wiring should be well and truly hidden. To many really good creative bikes are made with little or no thought for the wiring. I like my wiring tidy and when ever possible hidden. When you decide to build the bike you have always wanted, or a bike you think that manufactures should have made, some elements of the build will always be compromised by budget, the shear practically of the idea or the simple fact it would take to long to make.
Too many people are fearful of wiring and hence it is usually one of those areas of a bike that gets neglected. If you are prepared to spend a little time and effort a neat and tidy custom loom can be made. The basic equipment for making your own loom is an assortment of different coloured wires, a soldering iron, solder, heat shrink, electrical tape, and a few connectors.
‘Vehicle Wiring Products’ have a good range of various electrical supplies and can be found on the web. To save money, if you can find a scrap car, you can remove its wiring harness and recycle it. Ideally new cars that have been written off, so their harnesses are quite new. This will give you a variety of colours and the harness will be longer than a bikes, so giving you plenty for adjustment. Wire where the copper core has gone black and tarnished should not be used. It will be hard to solder and will be more prone to failure.
Connectors are really not that important, as you can solder all wiring without using them. The advantage of no connections is that there are no breaks in the wire and the potential for corroding connectors is avoided. The disadvantage is that if you have to remove a part it will need to be cut off and re-soldered back on. I have built bikes in the past with no connectors and aimed to keep all wires as intact as possible. There is good sound reasoning for this. Any break or connection in a wire creates resistance and the accumulative effect of this is voltage drop. For example, if you have a poor headlight output; you change the lens, the bulb and think the application of a fully charged new battery would cure it. You failed take into account the half a dozen old connections between the battery and the bulb. It might have been more cost effective to replace the wire between the two with new wire with less breaks.
Manufactures of motorcycles tend to have plenty of connections and redundant wires. The reason being is that they have to sell their bike in many different countries and so need to add extra or different parts to the same model of bike. If you construct your own loom you can eliminate these unnecessary wires and simplify others. The routing of the cable can be improved too as they are often placed for ease of manufacture. There is nothing worse that seeing a load of cable ties on a frame tube. It smacks of poor design and lack of thought, hence wiring should be of equal importance to that flash end can you got for your exhaust system. In the planning stage of custom bike building it is one of those thing often overlooked.
2. Front exit for the wiring loom near the ignition box.
For my bike the wiring will be as simple as possible and run where ever practical in the frame tubes. I planned the route of the wiring in advance when I was modifying the frame. The main harness will run up the main tube under the tank and exit near the ‘Boyer’ ignition box.
3. The finished wiring for the 'Boyer' and coils. Tidiness is next to Godliness
I decided not to use the con-volute tubing for the harness in the end as shown in photo 2. I heat shrank the whole lot and used the plastic braided harness cover for the length from the head stock to the headlight. One of our stainless steel clips was then used to hold the harness in position. The whole resulting wiring is neat and tidy with the minimum of connections ( photo 3. )
4. The alternator wires are run in a length of braided hose
The wiring from the alternator was a bit of a problem but was solved by the use of some braided hose to make a feature of it. A piece of aluminium tube and a stainless ‘P’ clip were used to secure the bottom of the hose covering the wires.
5. Rear Brembo master cylinder - the stop light wires run in the frame tube.
The rear brake light switch is fed by a wire running down the rear diagonal down tube and exits near the ‘Goodridge’ brake light switch. It is one of the bits of visible wiring, so I covered it with a rubber boot.
Switch gear is keep to a minimum, with the lights wired on permanently, so only a high/low beam switch is required. The other switch required is the engine cut switch and horn button. In the next part I will show you how the rear is wired, the switch gear wire is fitted and how the headlight is arranged.
By Colin Jones
Tags: boyer, brake light, Brembo, cable, cafe racer, CB750 four, electrical connections, Goodridge, honda, Suzuki RGV250, switch gear, wiring harness, wiring problems
Have you ever considered adding more videos to your blog posts to keep the readers more entertained? I mean I just read through the entire article of yours and it was quite good but since I’m more of a visual learner,I found that to be more helpful well let me know how it turns out! I love what you guys are always up too. Such clever work and reporting! Keep up the great works guys I’ve added you guys to my blogroll. This is a great article thanks for sharing this informative information.. I will visit your blog regularly for some latest post.
Thankyou for you kind comments. It is something we may do in the future, but we are just getting started with our blog really. One of the main reasons for doing it was to inform people of some of experiences we have had working on motorcycles and some of the problems we have encounted with faults on motorcycles, that could have been avoided. We always endeavour to help people solve their problems and not necessarily just for financial gain, even if it involves recommending another supplier of parts. I am planning a series of one off articles on some of the other bikes that were built here in the past, after the Honda is finished. After completion of the Honda the next project bike is a Triumph T140 Bonneville. I hope these articles will be useful to people as well.
All the best Colin
You have brought up some valid and interesting points. I’m glad to find your blog and will definitely drop by more often in the future. Thanks!
Very good blog post I love your site keep up the great posts
great post as usual!
I find myself coming to your blog more and more often to the point where my visits are almost daily now!
Just want to say what a great blog you got here!
I’ve been around for quite a lot of time, but finally decided to show my appreciation of your work!
Thumbs up, and keep it going!
Cheers
Christian, iwspo.net
Hey very nice blog!! Man .. Beautiful .. Amazing .. I will bookmark your blog and take the feeds also…
Just want to say what a great blog you got here!
I’ve been around for quite a lot of time, but finally decided to show my appreciation of your work!
Thumbs up, and keep it going!
Cheers
Christian,Diet Guide!
…
This is definately 1 in the best blogs I have sen in ages on the internet. Preserve up the excellent posts….
Just want to say what a great blog you got here!
I’ve been around for quite a lot of time, but finally decided to show my appreciation of your work!
Thumbs up, and keep it going!
Cheers
Christian,Earn Free Vouchers / Cash
Howdy, your site is on air in the radio! Good job mate. Your posts are truly great and bookmarked. Regards
…
Sweet submit….
Your feedback are very advised and beneficial. Have you considered producing professionally? Like a periodical or anything?
Boy, this is some high-class internet site
Stimulating thoughts here. Are you convinced this is the proper way to look at it though? My personal experience is that everyone should pretty much live and let live because what one person examines as just — another person simply doesn’t. Human beings are going to do what they want to do. In the end, they always do. The best we can hope for is to identify a few things here and there that hopefully, allows them to make just a little better informed decision. Otherwise, great post. You’re definitely making me think! –Shawn
Hi I have been reading your blog for the past two weeks and it is interesting, do you have a RSS feed?
I hope you will keep updating your content constantly as you have one dedicated reader here.
Brilliant blog posting. I found your post very interesting, I think you are a brilliant writer. I added your blog to my bookmarks and will return in the future.
Very good blog post I love your site keep up the great posts
Wow,What A Great Post!…
[...]I saw this really great post today.[...]…
I just needed to say that I found your blog via Goolge and I am glad I did. Keep up the very good work and I will ensure to bookmark you for when I have additional free time away from the books. Thanks!
Thanks for some great points there. I am kind of new to web surfing, so I printed this off to put in my file, any better way to go about keeping track of it then printing?